:: Forums »

#1: Question about Fantasy Film Author: LadySatine, Location: I can tell you where I wish I was...Miami!

Posted: 0
----
I bought some of this stuff, but I'm not exactly clear on the directions. Do I put it in the oven? Or is it supposed to be formed over a flame or something? I take the simplest things and turn them hard. Blah. Thanks in advance! Big Grin

#2: Re: Question about Fantasy Film Author: lovelauraland, Location: England

Posted: 0
----
with the fantasy film I had from Piper I placed 3 sheets together and put them under a tea towel then ioned over the top to make them stick together, I then glued wire to it (PVA glue) stand some heavey bottles on top and let it dry over night then next day I used a joss stick to melt around the edges and make some holes.
cgi.ebay.co.uk/ws/eBay...:IT&ih=012
The wire should make it poseable.
I wouldn't bake it as I think it could melt.
Good Luck and I hope this helps Happy

#3: Re: Question about Fantasy Film Author: LadySatine, Location: I can tell you where I wish I was...Miami!

Posted: 0
----
Thank you for your help, that's a beautiful mermaid. Smile

#4: Re: Question about Fantasy Film Author: allgoodstrading, Location: Index WA

Posted: 0
----
You can bake it or use a embossing heat gun too. bake it with a little liquid sculpy and set your oven to 275 for 10 minutes. you can add lots of fun stuff to the sculpy, glitter, micro beads, fake fish scales, so many fun posibilities with this stuff. try cutting some into tiny bits and sprinkle it on your wings like glitter, then fire for a few minute in the oven, WOW that is sparkly!

#5: Re: Question about Fantasy Film Author: LadySatine, Location: I can tell you where I wish I was...Miami!

Posted: 0
----
Hmmm, very interesting...thanks!

#6: Re: Question about Fantasy Film Author: princessFirefly, Location: Quebec, Canada

Posted: 0
----

lovelauraland wrote:

with the fantasy film I had from Piper I placed 3 sheets together and put them under a tea towel then ioned over the top to make them stick together, I then glued wire to it (PVA glue) stand some heavey bottles on top and let it dry over night then next day I used a joss stick to melt around the edges and make some holes.
cgi.ebay.co.uk/ws/eBay...amp;ih=012
The wire should make it poseable.
I wouldn't bake it as I think it could melt.
Good Luck and I hope this helps Happy

Oooooooooo i bet a sodering gun would work too!!!!!

#7: Re: Question about Fantasy Film Author: MBryan, Location: Connecticut, USA

Posted: 0
----
I use a hair dryer to melt the film when making fairy wings. I use a clothing iron when I make flat butterfly wings.

I've never tried the oven before, and prolly never will cuz I'd fry them, but it does sound interesting.

-> Customs

All times are GMT - 6 Hours

Page 1 of 1